Templar X 250

[Moto_Wojo]

Originally Posted by Nutcracker

Ok here's the results on sprockets. First off the I incorrectly measured the bolt pattern it's 153MM not 150. I will attach the link for the sprocket I used. So I tried 2 sprockets. 38 tooth and 42 tooth. The angle from the swing arm to the front sprocket is to much causing the majority of the chain to ride on the guide. Gearing was very high 20MPH plus 1st gear. I did not trust high speed with so much chain laying on the guide. I'm sure it would hit 80.. Not what I'm after. So the 42 tooth is FANTASTIC! The bike preforms so much better. I put 50 miles on the bike today. 42 tooth gave me about a 5 to 6 mph gain in each gear. Making 55MPH achievable at only 5K RPM. The harmonics from the non-counter balanced engine is not noticeable. Very comfortable. It hits 70 still pretty wound out but not like it's going to explode.. I'm still very able to lug thru trails no issue the engine has a good low end torque and has plenty of spin when I punch the throttle just lugging along.

Would you be able to attach the link for the sprockets you used? I would really appreciate it!

Thanks!