05-10-2022, 08:59 PM
|
#1 |
|
Join Date: May 2019
Location: Illinois
Posts: 867
|
2022 kpr200
I received my bike about 5 days ago and put it together that night,
 sometimes other things just have to wait! I ran the engine through a couple of heat cycles and dropped the oil and cleaned the screen, and refilled with T4. Also I checked the coolant level in the radiator per owners manual after blipping the throttle a few times then letting it cool down. Then I took it out and seated the rings for about 25 miles and dropped the oil again. What I found out is the bike is geared a little too low so I took the rear wheel off and removed both rear and front sprockets and ordered new ones. I am going with a 16 or 17 front and a 42 rear. GEARING STOCK 15t front 46t rear Front sprocket is a JTF259 Rear sprocket is a JTR269 The sprockets that Megadan posted in his resource thread for the hawk also work on the KPR. 
__________________
2022 Venom KPR 200 Red- the fastest color 16t and 46t sprockets, NGK Iridium CPR8EAIX-9, aftermarket full exhaust system. Top speed 81GPS 2023 Venom SS3 KP mini 150– Nibbi carb, Nibbi air filter, aftermarket muffler, decat 2022 Venom Ghost chopper 250 1997 Honda GL1500 Goldwing 1978 Kawasaki KL250 https://youtube.com/@herbiesgarage681 Last edited by herbie; 07-02-2022 at 09:21 AM. |
|
|
|
|
|
|
Threaded Mode