165fmm and nibbi PE28FL tuning questions.

[NathanTC]

Originally Posted by Megadan

I think you are forgetting the Primary Drive ratio. That is the ratio between the crank gear and clutch basket gear.

i knew there was something im missing somewhere. My bike is not in any of the list on any of these things.

I assumed that the crankshaft to drive sprocket would be .98 in 5th gear. Didn't think there was another reduction somewhere in between. Engine is a 165FMM other than that, i cannot find the info on the ratio you just mentioned.

Also i hope to get the bike apart again soon to check that float level. I see a couple things i did incorrectly when setting the float that may have it a bit high.