Nibbi PE28FL

[Megadan]

Originally Posted by China Rider 27

Other PE30 I have worked with they use a molded cable end fitting stop instead of the screw in style. Some of the 90 degree cable ends are just a tube that sits in this slot and the cable fits flush at the end and only the cable itself goes in the tube. Could those be cut down. The Magician has this problem and I had to work through it some. On the Magician I used a 45 degree sloped back toward the center tank channel which gains some space. But dent in the tank no big deal either.

I am willing to give these options a try, but I think I would need to clearance the tank or move the carb back or over in either case, elbow or not.

My main issue is just time to experiment at this point. I get half of one day a week to tinker or do anything of the sort, and that time easily gets taken up with other things.