09-09-2021, 06:06 PM | #1 |
Join Date: Sep 2021
Posts: 1
|
Hello everyone! Looking for some help
Hello, I have gotten some great info here in the past and have run into a problem i could use some help with.
I am swapping a 50cc kazuma engine into a ct90 frame, the engine has 4 forward gears and is electric start only, it has 5 wires coming out of the crank case. Now that i have it running I don't think the battery is charging. When I rev up the motor it shows about 12.8 volts with the battery in place, without the battery it reads 5- 7.5 volts. The yellow wire going into the regulator reads about 10 volts ac. I thought it might have a 6 volt regulator so I swapped it but the voltage remains the same. Is the stator going bad, or a wiring problem? any help is appreciated, Thanks! |
|
|
|
|
|