Must have for all owners (Diagnostic capability)

Chris_Top_Her · 09-04-2021, 10:01 PM

I keep having to recommend this in various places, so I will put everything here.

If you own a Chinese motorcycle with a delphi ECU, it is in your best interest to have the agility to at least pull codes, and monitor parameters when trying to trouble shoot problems. Really, it's helpful for any vehicle as a diagnostics fee might cost you 100USD. Links are just what I have, these parts can also be found on ebay etc.

The connector is for the Delphi 6 pin connector ECU (to interface a Delphi mt05.x ECU).

You will need the 6 pin cable to interface into the ECU, which has a female OBD2 connector on the other side. ~10USD

Name: plug.jpg
Views: 1001
Size: 16.7 KB

Name: plug.jpg
Views: 1001
Size: 16.7 KB

https://www.aliexpress.com/item/1005...27424c4dr1OPeG

You will need an openport adapter. Genuine Tactrix or Chinese knockoff.
Genuine ~170USD new
Knock off ~30USD
- Ask around for knock off. I don't know of a good source, because I have a genuine (used it for tuning my car) but they cost about $30.

https://www.tactrix.com/index.php?op...ed=1&Itemid=53

Name: Tactrix_Openport_4b4437551be29.jpg
Views: 995
Size: 44.8 KB

Name: Tactrix_Openport_4b4437551be29.jpg
Views: 995
Size: 44.8 KB

And last but not least, you will need ECU HUD Hacker which you can load onto a windows laptop (which can be had cheap on ebay if you don't have one). It is "sharityware", which means it's free to download but the author requests you donate to a GMO or something (this is a honor system, it requires no verification or anything). It is easy to use and can pull codes, clear codes (some codes, others require unplugging the ecu to clear). Also, you can use this to ECU tune as well.

https://netcult.ch/elmue/HUD%20ECU%20Hacker/

09-04-2021, 10:01 PM	#1
Chris_Top_Her Join Date: May 2020 Location: San Antonio, Texas Posts: 62	Must have for all owners (Diagnostic capability) I keep having to recommend this in various places, so I will put everything here. If you own a Chinese motorcycle with a delphi ECU, it is in your best interest to have the agility to at least pull codes, and monitor parameters when trying to trouble shoot problems. Really, it's helpful for any vehicle as a diagnostics fee might cost you 100USD. Links are just what I have, these parts can also be found on ebay etc. The connector is for the Delphi 6 pin connector ECU (to interface a Delphi mt05.x ECU). You will need the 6 pin cable to interface into the ECU, which has a female OBD2 connector on the other side. ~10USD https://www.aliexpress.com/item/1005...27424c4dr1OPeG You will need an openport adapter. Genuine Tactrix or Chinese knockoff. Genuine ~170USD new Knock off ~30USD - Ask around for knock off. I don't know of a good source, because I have a genuine (used it for tuning my car) but they cost about $30. https://www.tactrix.com/index.php?op...ed=1&Itemid=53 And last but not least, you will need ECU HUD Hacker which you can load onto a windows laptop (which can be had cheap on ebay if you don't have one). It is "sharityware", which means it's free to download but the author requests you donate to a GMO or something (this is a honor system, it requires no verification or anything). It is easy to use and can pull codes, clear codes (some codes, others require unplugging the ecu to clear). Also, you can use this to ECU tune as well. https://netcult.ch/elmue/HUD%20ECU%20Hacker/ __________________ CSC RX4 2020 Last edited by Chris_Top_Her; 09-05-2021 at 02:38 PM.
	2