Lifan Xpect EFI Stalling

[Chris_Top_Her]

Originally Posted by mototech77

I also did more research on the ECU diagnostic port. Looks like there are not missing wires like I thought. It appears now that there is power, ground and K-line data. I ordered a Honda 6-pin to OBD2 adapter cable. When it arrives, I’m going to verify the pin-out, then attempt to interface with my ELM adapter. Worth a try at least.

All you need is this https://www.aliexpress.com/item/Diag...27424c4d4kuVOq (als available on ebay) and a genuine or knock off tactrix open port adapter. ECu hud hacker is free to interface with the ECU.

Also I would reset fuel trims (d/c ECU for a bit) since you've made mechanical adjustments to the engine.