What Did You Do To Your Dual Sport Today?

tknj99 · 11-30-2020, 03:06 PM

Installed JT 42 Tooth Rear Sprocket.
Note1: I bought $5 set of snap ring pliers from Harbor Freight and they were not sturdy nor large enough to do the job. Luckily i had a pair of needle nose pliers that were more than adequate. Also, i was surprised to find the 4 bolts to be quite easy to remove, they were maybe 10 ft/pounds if that. I blue locktited them back on and made them nice and tight evenly, no movement laterally.
Note2: Went from 5 adjustment lines down to 2 with the Niche 428 Chain

Feels very good on the road.. Hit a GPS verified 68mph before having to slow down but im thinking 70mph on a long flat is possible, nice increase over the 46 rear and did not degrade power to a noticeable degree.

11-30-2020, 03:06 PM	#14
tknj99 Join Date: Oct 2020 Location: Central VA Posts: 1,259	Installed JT 42 Tooth Rear Sprocket. Note1: I bought $5 set of snap ring pliers from Harbor Freight and they were not sturdy nor large enough to do the job. Luckily i had a pair of needle nose pliers that were more than adequate. Also, i was surprised to find the 4 bolts to be quite easy to remove, they were maybe 10 ft/pounds if that. I blue locktited them back on and made them nice and tight evenly, no movement laterally. Note2: Went from 5 adjustment lines down to 2 with the Niche 428 Chain Feels very good on the road.. Hit a GPS verified 68mph before having to slow down but im thinking 70mph on a long flat is possible, nice increase over the 46 rear and did not degrade power to a noticeable degree. __________________ 2024 Zuma Storm 150 DLX 2019 Beta 430 RRS 2018 VStrom 1000 XT Former China Bikes: Tao DBX1, Brozz 250, CSC RX4, Titan DLX, Templar X Last edited by tknj99; 11-30-2020 at 04:32 PM.
	2