Kp-Mini Self-Destruction [Build]

Falkon45 · 11-25-2020, 07:40 PM

Well, the problem with the 390s are there were trying to cut weight. They also said bad machine work, so the heads were uneven, and would vote head gaskets.

But, how the kp radiators are mounted, there's one on each side. That gives you some space, if you have somewhere to put them. The fluid does green the lowest point up to the first radiator, across, and down through the second radiator into the head. Same principal, just split in two. Combined, they should have approximately the same surface area as your radiator. The side closest to the head has the fan mounted. It's also the fill and radiator cap. I haven't looked for the high pressure caps that can fit, but this just have me the idea to look for them.

11-25-2020, 07:40 PM	#10
Falkon45 Join Date: Aug 2020 Location: Savannah, Ga Posts: 759	Well, the problem with the 390s are there were trying to cut weight. They also said bad machine work, so the heads were uneven, and would vote head gaskets. But, how the kp radiators are mounted, there's one on each side. That gives you some space, if you have somewhere to put them. The fluid does green the lowest point up to the first radiator, across, and down through the second radiator into the head. Same principal, just split in two. Combined, they should have approximately the same surface area as your radiator. The side closest to the head has the fan mounted. It's also the fill and radiator cap. I haven't looked for the high pressure caps that can fit, but this just have me the idea to look for them.
	0