11-15-2020, 11:26 PM
|
#11 |
Join Date: Aug 2020
Location: Australia
Posts: 1,394
|
Basic Side Panel Fab.
CAD/Cardboard Assisted Design.
1mm Aluminium/Aluminum sheet. Mask off to prevent scratches, jiggy cut, Bespoke sand to fitment, wallow out some holes for wiggle room. held on with 6mm hex head button bolts and nylock nuts. Bought extra and replaced the 4x Phillips head bolts that holds the engine side cover for the 14mm engine turn over access hole. Close enough. will put some foam tape in between the frame and cover to space out to prevent frame scratching and mitigate vibration noises. Added safety from reflective surface. |
|
|
|
|
|
|
Threaded Mode