New Orion RXB-250L question on headlight mount

jcalis · 10-18-2020, 08:50 PM

Hello all

Fellow RPS hawk owner here and just bought a second bike, an Orion RXB-250L. Assembly was easy except for one part. I cannot figure out the lower mounting point for the headlight assy. The lower triple has two holes which seem be the same width as the lower headlight mounts. trouble is when the top mounts of the headlight are attached, the lower mounts are over an inch too high to connect to the lower triple. I think I am missing a bracket or long bolts / spacers. Pictures on the website show a slightly different setup on the front end with a bracket and reflectors on the front fender. My reflectors are mounted directly to the lower triple. Any ideas?

10-18-2020, 08:50 PM	#1
jcalis Join Date: Aug 2020 Location: Massachusetts Posts: 15	New Orion RXB-250L question on headlight mount Hello all Fellow RPS hawk owner here and just bought a second bike, an Orion RXB-250L. Assembly was easy except for one part. I cannot figure out the lower mounting point for the headlight assy. The lower triple has two holes which seem be the same width as the lower headlight mounts. trouble is when the top mounts of the headlight are attached, the lower mounts are over an inch too high to connect to the lower triple. I think I am missing a bracket or long bolts / spacers. Pictures on the website show a slightly different setup on the front end with a bracket and reflectors on the front fender. My reflectors are mounted directly to the lower triple. Any ideas? __________________ 2019 RPS Hawk, 2020 OrionRXB-250L
	0