Quote:
Originally Posted by aaw611
That main jet sounds wayyy huge. Any of the idle/choke issues are going to be related to the pilot jet. That's what you should be focusing on in my opinion.
|
Quote:
Originally Posted by manco15158
Ok, bumped the main jet up to a 135 and turned the mixture screw to 2 turns. This solved the issue in 5th gear. Have to use the choke to start it but it warms up to where no choke is needed. The valve adjustments definitely helped. I will change the pilot jet when it comes to hopefully fix the choke issue. I attached a photo of my pilot jet and carb. Thanks everyone for the help!
|
Yep, Delta, OH is only 122ft higher than me; guys using a 135 ish main are the ones with head porting and cams, higher compression... that's WAY too huge for a basically un-modded CG250. It's masking the problem, not fixing it.
Your issue lies within the pilot circuit, not the main. Fixing that will likely take care of your 5th gear issue as well; doubtful you're only running half to full throttle in 5th gear. Pilot circuit and needle jet are the main fuel delivery at this point.