Go Back   ChinaRiders Forums > Technical/Performance > Dual Sport/Enduro
Register FAQ Community Calendar Today's Posts Search
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 09-05-2020, 12:33 AM   #1
Qbrozen   Qbrozen is offline
 
Join Date: Sep 2020
Posts: 5
New X-pect not starting

Hey folks,

My first post ... about my first motorcycle ... with my first problem.

I received my new Lifan X-pect from txpowersports yesterday afternoon. Since then, I have been trying to get this bike to start. As it sits, the injector is not firing, although the harness, fuel, and spark all test OK, as does the injector when directly supplied power. I even tried a new injector with the same result.

I kept thinking maybe this is some problem with the kill switch. As I was removing panels and the fuel tank so I could get a look at all the wiring, I kept eyeballing a dead-end "growth" off a 2-wire harness and wondering what it was. I googled the number on the side of it, YC200411, and found nothing. I thought it might be an ambient temp sensor and googled that, but no luck. Just for kicks, I removed it. Hit the starter and, lo and behold, the injector started shooting fuel. I inserted it into the intake and she fired right up. Huh. Revved it a few times. CEL was on, but I thought maybe I solved the issue; that this "growth" was some sort of disabling fuse for transport. Buttoned the bike back up, got on, and .... nothing. It refused to start again. WTH?!

I reached out to Lifan, but they told me they don't deal with the general public and I had to reach out to the selling dealer. I did, however, get them to take a look at the "growth" and they informed me it is, indeed, a temperature sensor. I've uninstalled and reinstalled this sensor, disconnected and reconnected the battery, etc. I have sent an email to txpowersports, but nothing yet.

Is any of this striking a chord of familiarity with anyone? I'm kind of assuming this sensor is the issue only because it fired the one time with it disconnected. But why the heck it won't fire again is baffling to me. I am good with cars, but I'm in slightly foreign territory here. Beginning to think I should have gotten a carbureted bike.

Oh, I almost forgot. The CEL now flashes when the ignition is on. 1-1-1-3. Can't seem to find that anywhere, either. Anyone know what that code is about?



Last edited by Qbrozen; 09-05-2020 at 12:45 AM. Reason: added CEL code
 
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:30 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.