05-14-2020, 09:56 PM | #1 |
Join Date: May 2020
Posts: 15
|
2020 Brozz 250 w/ Yoshimura RS-2
Pretty simple install with only minor inconveniences.
The exhaust flange that bolts up to engine needed to be slotted not drilled. The middle exhaust pipe bolt hole was off by an inch but the whole exhaust was tight regardless. The original muffler bolt hole was too far forward and I used what seemed to be an original or secondary bolt hole with the provided spacer. The airbox clearance was perfect. It was at least an inch away from it. No problems with clutch cabling either. Really satisfied with the install. A wheeee bit pricey but screw it, someone had to do it, right? Oh. Yeah, it's loud. |
|
|
|
|
|