04-24-2020, 03:14 PM | #1 |
Join Date: Apr 2019
Posts: 336
|
tapping into 12v for LED relay switch tbr7
where would be a good spot to tap into a 12v source for the lighted switch that will operate/trigger my relay and power my aux LED lights? have already mechanically installed a lighted switch on my clutch side.... my thought was patking lights..... i will be using one positap brand tap connector and grounding out the negative to chassis....
the LEDs are also already mechanically installed.... thanks and TGIF! souping up and modifying this bike is alot of fun.....i am almost done with everything.... almost
__________________
been around bikes for a while.... honda 72 cb200t, zuki 96?/2002 katana, 12 vstrom,09 vstar, kawi ltd440, 82 zuki Gs1100, Tao Tbr7 all about the Tao MotorsTBR7 http://www.chinariders.net/showthread.php?t=25553 |
|
|
|
|
|