300cc Loncin eng

DesertDog · 05-04-2008, 12:32 AM

taking shots as i go , found out i did'nt have to remove the clutch at all, two bolts holding the cam gear on took em off the gear came off the cam , took the chain off,
>
>
i will need a know-it-all to help with the puting timing back in place.
i'll follow your tip on that.
>
>
the piston looked burnt (scorched) down the side near the top, inbetween the first ring and the second, is that normal ?,
>
>
piston wall (sleeve) looked very scratched, smooth, but all kinds of swirl scratches, going this way and that, in a downword spiral, is that ok ? yes this the first 4 stroke single cylinder i've tore into,
>
so i guess i will need to order rings, and a clutch cover,

will post pics when all done and i can get parts,
thanks Vince and kato

05-04-2008, 12:32 AM	#30
DesertDog Join Date: Apr 2008 Posts: 782	taking shots as i go , found out i did'nt have to remove the clutch at all, two bolts holding the cam gear on took em off the gear came off the cam , took the chain off, > > i will need a know-it-all to help with the puting timing back in place. i'll follow your tip on that. > > the piston looked burnt (scorched) down the side near the top, inbetween the first ring and the second, is that normal ?, > > piston wall (sleeve) looked very scratched, smooth, but all kinds of swirl scratches, going this way and that, in a downword spiral, is that ok ? yes this the first 4 stroke single cylinder i've tore into, > so i guess i will need to order rings, and a clutch cover, will post pics when all done and i can get parts, thanks Vince and kato __________________ DesertDog
	0