|
|
|
|
Thread Tools | Search this Thread | Display Modes |
08-06-2019, 01:52 AM | #1 |
Join Date: Aug 2019
Posts: 1
|
Jonway YY150T-12 will not crank after trying to jumpstart
I tried to jump my sons scooter and all of a sudden it stopped cranking. Right away I tried to start it off the relay and it started. I am mechanically inclined and I am stumped on this one.. I am not getting power out of the starter switch but there is a ground.
I switched the starter switch with the horn switch to see if that would help and same thing. And yes I am pressing the back brake to compete the circuit . I know some might say it is a broken wire but at this point not sure where to begin looking .. Any ideas on this and is there a way to bypass the switch. Also the kill switch is off, just wondering if there is a fast fix for this .. Again no power to the starter switch . Thanks Again This is based off a GY6 |
|
|
|
|
|