08-17-2018, 10:29 PM | #1 |
Join Date: Aug 2018
Posts: 6
|
Gy6 egr vs non-egr camshaft question
I tried to install a non-egr A9 camshaft to an 150 cc egr GY6 engine. the lobe height is not high enough. I verified the cam and it was correct. I suspect the egr head has a lower ratio rocker arm. I was wondering if i can change the cylinder head and rocker assembly to a non-egr. Also, I may want to install an 165cc or a 172cc big bore kit. Any help would be appreciated.
2016 Znen rx 150 , engine BN157QMJ |
|
|
|
|
|