VM 26 Issues

mac1029 · 06-19-2018, 02:45 PM

Okay been trying to dial in this carb to no avail, so wanted to see if the carb gurus can chime in.
Background airbox mod with K&N filter, Ebay exhaust, valve lash just reset after 100 miles to .03/.04., i am at 600-700ft elevation. Mikuni carb is jetted with 27.5 pilot with 120 main needle on center notch.
All seems to run good except when i am in the WOT position, it will pull but then hesitate and pull again like its cutting out? now after i return from a ride when i stop the idle will drop low and engine will die, but will restart no problem.
I am no carb guru hell it took me 2 months to dial in my harley, but this one has me baffled as to which way to go?

06-19-2018, 02:45 PM	#1
mac1029 Join Date: May 2018 Location: New Hampshire Posts: 45	VM 26 Issues Okay been trying to dial in this carb to no avail, so wanted to see if the carb gurus can chime in. Background airbox mod with K&N filter, Ebay exhaust, valve lash just reset after 100 miles to .03/.04., i am at 600-700ft elevation. Mikuni carb is jetted with 27.5 pilot with 120 main needle on center notch. All seems to run good except when i am in the WOT position, it will pull but then hesitate and pull again like its cutting out? now after i return from a ride when i stop the idle will drop low and engine will die, but will restart no problem. I am no carb guru hell it took me 2 months to dial in my harley, but this one has me baffled as to which way to go? __________________ 2017 Hawk 250 1998 Harley Dyna
	0