TT250 Clutch cover stuck on dowel pin..Ideas please

Sullybiker · 06-01-2018, 08:51 AM

First commute to work today since I changed it, so far, so good.

The clutch is operating as it should. I don't remember the last time I could smoothly pull away from a stop feathering the clutch all the way out, without getting the hard grab about halfway through. I had a slow steep hill crawl behind a bus at an intersection, a good test for the problem and there were no problems.

Neutral is the same as it ever was once the engine's warm, i.e. needs a little rock back and forth to pop in, but the clutch friction point behaviour is completely fixed.

I'll see if it stays that way, but for now I'm pretty pleased with it.

06-01-2018, 08:51 AM	#16
Sullybiker Join Date: Dec 2016 Location: Western PA Posts: 363	First commute to work today since I changed it, so far, so good. The clutch is operating as it should. I don't remember the last time I could smoothly pull away from a stop feathering the clutch all the way out, without getting the hard grab about halfway through. I had a slow steep hill crawl behind a bus at an intersection, a good test for the problem and there were no problems. Neutral is the same as it ever was once the engine's warm, i.e. needs a little rock back and forth to pop in, but the clutch friction point behaviour is completely fixed. I'll see if it stays that way, but for now I'm pretty pleased with it.
	2