Hawk with Mikuni Help

mac1029 · 05-29-2018, 07:42 AM

OK so trying to get this carb tuned and just would like a consensus of what i might need.
First off i have done the following; Air box mod w/K&N filter, upgraded exhaust,new iridium plug, and a mikuni with a 115 main and 25 slow, idle mix turned almost 2 turns due to mods, at 1 1/2 turns it didnt seem right.
I have followed similar set ups for the mods i have. i am also at 650ish elevation.
The issue i am getting is at idle when i blip the throttle just a bit it stalls, now if i roll on the throttle its fine?
is my idle jet too small? should i go to a 27.5 or 30?
is my main too small? go up to a 120?
All input is appreciated.

05-29-2018, 07:42 AM	#1
mac1029 Join Date: May 2018 Location: New Hampshire Posts: 45	Hawk with Mikuni Help OK so trying to get this carb tuned and just would like a consensus of what i might need. First off i have done the following; Air box mod w/K&N filter, upgraded exhaust,new iridium plug, and a mikuni with a 115 main and 25 slow, idle mix turned almost 2 turns due to mods, at 1 1/2 turns it didnt seem right. I have followed similar set ups for the mods i have. i am also at 650ish elevation. The issue i am getting is at idle when i blip the throttle just a bit it stalls, now if i roll on the throttle its fine? is my idle jet too small? should i go to a 27.5 or 30? is my main too small? go up to a 120? All input is appreciated. __________________ 2017 Hawk 250 1998 Harley Dyna
	0