Hellcat finally snapped

DudeMantia · 05-17-2018, 02:19 AM

I guess I just pushed my bike too hard but while riding, the choke plate inside my PZ25 Carb ended up breaking in half. I found a large piece of the plate on the other side of the carb that got stuck on its way to the manifold. The worst of it all is that a small chunk got sucked into the engine somehow, and now the bike turns over but won't start up. I really should have switched the carb sooner, the plate itself had signs of it being over tightened from factory.

I'll have some pictures within the week, I'm taking it over to a shop to crack it open and see the damage soonish.

In any case a new engine doesn't exactly break the bank to hard.

Hope it doesn't come to that though.

05-17-2018, 02:19 AM	#1
DudeMantia Join Date: May 2018 Location: California Posts: 30	Hellcat finally snapped I guess I just pushed my bike too hard but while riding, the choke plate inside my PZ25 Carb ended up breaking in half. I found a large piece of the plate on the other side of the carb that got stuck on its way to the manifold. The worst of it all is that a small chunk got sucked into the engine somehow, and now the bike turns over but won't start up. I really should have switched the carb sooner, the plate itself had signs of it being over tightened from factory. I'll have some pictures within the week, I'm taking it over to a shop to crack it open and see the damage soonish. In any case a new engine doesn't exactly break the bank to hard. Hope it doesn't come to that though. Last edited by DudeMantia; 05-17-2018 at 04:03 AM.
	0