Hawk skid plate/center stand

[JerryHawk250]

Originally Posted by Ariel Red Hunter

I have a suggestion on the lock it up problem. A spring loaded hardened steel 3/8's pin that engages a latch plate attached to the frame would do the job. Perhaps there is a frame cross tube the bolt could use, in which case I would use a hard 1/4 inch pin with a piece of re-inforced rubber hose to protect the frame tube....ARH

I'm thinking of something along these line. Being that these bikes are meant for off road it would be a good idea of having a way to lock it in place so the center stand won't be bouncing around.