Need help identifying ATV and ignition coil

skidaddyrickus · 09-26-2017, 11:24 AM

Hello –
Newbie to the forum here. Was referred by VMC parts.

I’m searching for an ignition coil for a 50cc 2 stroke that has lost its spark. Here is what I know:

· Lil Guy 50
· VIN: LLCLSD2C551002438
· It does not have a CDI
· I replaced the stator coil plate– photo of bad one attached.
· I purchased a conventional ignition coil that would not work. I think because it doesn’t have a CDI
· I purchased a Voltage Regulator as something else to try – no luck here either.
· I have low voltage coming from the stator to the coil when attempting to start, but I don’t know how much it should be. ???
· No ground issues coming from safety / stop switches.
· I checked the resistance of the Ignition coil and get a good reading from one leg but 0 on the other. Someone told me you can’t really tell if these type coils are bad by checking them this way. ??? Photos of the coil are attached as well as the magnet.

My thoughts are it has to be the ignition coil or the magnets since the stator is new. Hopefully someone can lead me in the right direction.
Name: IMG_2016.jpg
Views: 446
Size: 91.3 KB

Name: IMG_2016.jpg
Views: 446
Size: 91.3 KB

Name: IMG_2017.jpg
Views: 463
Size: 75.0 KB

Name: IMG_2050.jpg
Views: 487
Size: 95.5 KB

09-26-2017, 11:24 AM	#1
skidaddyrickus Join Date: Sep 2017 Posts: 9	Need help identifying ATV and ignition coil Hello – Newbie to the forum here. Was referred by VMC parts. I’m searching for an ignition coil for a 50cc 2 stroke that has lost its spark. Here is what I know: · Lil Guy 50 · VIN: LLCLSD2C551002438 · It does not have a CDI · I replaced the stator coil plate– photo of bad one attached. · I purchased a conventional ignition coil that would not work. I think because it doesn’t have a CDI · I purchased a Voltage Regulator as something else to try – no luck here either. · I have low voltage coming from the stator to the coil when attempting to start, but I don’t know how much it should be. ??? · No ground issues coming from safety / stop switches. · I checked the resistance of the Ignition coil and get a good reading from one leg but 0 on the other. Someone told me you can’t really tell if these type coils are bad by checking them this way. ??? Photos of the coil are attached as well as the magnet. My thoughts are it has to be the ignition coil or the magnets since the stator is new. Hopefully someone can lead me in the right direction.
	0