Zong 169fmm pickup coil

crackerjac · 07-22-2017, 11:32 PM

I have a no spark issue on my zongshen 169Fmm (Honda 230 clone). Resistances appear to be in spec for the pickup coil and stator but if someone can verify the correct ball park numbers I'd appreciate it.

I have to check voltages for the pickup and black/red stator wire. Can someone tell me what they should be approximately? AC volts

Is it possible that the pickup coil can be too far away from the reluctor tab on the flywheel? When I put it together it looked like one of the mounting holes was elongated a bit, the previous owner my have been playing. Is there a way to setup the pickup distance properly on these? Seems almost impossible giving the design.

07-22-2017, 11:32 PM	#1
crackerjac Join Date: Sep 2016 Posts: 103	Zong 169fmm pickup coil I have a no spark issue on my zongshen 169Fmm (Honda 230 clone). Resistances appear to be in spec for the pickup coil and stator but if someone can verify the correct ball park numbers I'd appreciate it. I have to check voltages for the pickup and black/red stator wire. Can someone tell me what they should be approximately? AC volts Is it possible that the pickup coil can be too far away from the reluctor tab on the flywheel? When I put it together it looked like one of the mounting holes was elongated a bit, the previous owner my have been playing. Is there a way to setup the pickup distance properly on these? Seems almost impossible giving the design.
	0