Tao 125

Nicksickler94 · 03-17-2017, 12:35 AM

Question.. So I recently bought a tao 125 from a guy and he said the carb was bad. I ordered a new carb and throttle cable. I installed both of them on the ATV and now right when you start it the engine runs at full throttle even if I am not touching the throttle. There is also no response when you do try to use the throttle lever. Just runs at continuous full throttle. I'm new at working on ATVs but I'm pretty mechanically inclined but I'm stuck. Help!!!! Also found out the kill switch doesn't work. I had to pull the spark plug wire off the spark plug just to get the engine to turn off and I can't find any wire diagrams to fix it. Help!!!!

03-17-2017, 12:35 AM	#1
Nicksickler94 Join Date: Mar 2017 Posts: 1	Tao 125 Question.. So I recently bought a tao 125 from a guy and he said the carb was bad. I ordered a new carb and throttle cable. I installed both of them on the ATV and now right when you start it the engine runs at full throttle even if I am not touching the throttle. There is also no response when you do try to use the throttle lever. Just runs at continuous full throttle. I'm new at working on ATVs but I'm pretty mechanically inclined but I'm stuck. Help!!!! Also found out the kill switch doesn't work. I had to pull the spark plug wire off the spark plug just to get the engine to turn off and I can't find any wire diagrams to fix it. Help!!!!
	0