02-25-2017, 01:53 PM | #1 |
Join Date: May 2016
Posts: 59
|
My Current List of Mods (Vader 125)
Alright, so after receiving the same questions over-and-over regarding the mods I have done to my Vader, I decided to finally put a list together so that you guys can see what mods I have done to the bike and where you can get these mods at.
Here is my current list for the Boom Vader 125: - Front Sprocket: 428-16t (Fit 17mm Shaft) (~$8) Link: http://www.ebay.com/itm/Motorcycle-A...lVEApO&vxp=mtr - Headlight Bulbs: H6 BA20D Type 5W LED (~$9) Link: http://www.ebay.com/itm/2x-H6-BA20D-...oAAMXQLs5RrkpK - Mikuni 26mm Carburetor + Intake Pipe + Pod Filter (~$38-$43) Link: https://www.amazon.com/GooDeal-Carbu...+Pit+Dirt+Bike - Mikuni Jets – Includes Jet Sizes From 88 – 125 (I’m currently running a 120) (~$10) Link: https://www.amazon.com/Wings-Mikuni-...ds=mikuni+jets - Fuel Petcock – This is optional, but recommended if you decide to buy the 26mm Mikuni since there is no built-in petcock in the carburetor. (~$5) Link: https://www.amazon.com/INLINE-VALVE-...KART+DIRT+BIKE - UNI Breather Filter Push in Type 5/16 Inch Universal – Used on the crankcase ventilator hose (~$13) Link: https://www.amazon.com/Breather-Filt...Inch+Universal - RSC Clutch Lever – Shorty (~$105) Link: http://www.righteousstuntmetal.com/i...al/levers.html - Brembo Lefthand Master Cylinder/Lever w/ Built-In Reservoir. This was included in a Grom Junction Valve kit that I ordered from TacticalMindz.com . However, DO NOT ORDER THE JUNCTION VALVE KIT. I could not get the Junction Valve to work correctly in the rear master cylinder. It kept blowing out under high pressure. If you want a Stunt Handbrake, find a Left Hand Master Cylinder on eBay. - 65” Steel Braided Brakeline (From Lefthand Master Cylinder directly back to rear brake) There is no longer a link for the Brake Line I ordered. I paid $15 for it, but expect to pay ~$50-70 for a line that long. - Exhaust: AR Low Mount Exhaust (For 2014 Grom) (~$130) **HEADS UP: This exhaust requires extra modifying to fit! I had to relocate my kickstand because of it! BUYER BEWARE! Link: https://www.amazon.com/Honda-Aodonly.../dp/B01BHQ7E6S - Stunt Bar / 12 Bar I built mine at work. If you’d like a 12 Bar, check out uptrade7784 aka “402 Innovations.” He builds Stunt Bars for the Omaha Grom Squad (including Fooligan himself). They look nice and are very well priced (Currently @ $230). http://www.ebay.com/usr/uptrade7784?...p2047675.l2559 There is the list! I’ll continue to add to the list as I continue to modify the bike. And if you guys were curious about my Hawk 250, the only mods I have done to it are: 16t Front Sprocket, DPR8EIX-9 Iridium IX Spark Plug, and exhaust baffle removal. I’m also using a larger main jet in the stock carb, but I can’t remember what size at the moment. The Jet Kit that I listed for the Vader 125 Mikuni Carb also works with the stock carb on the Hawk 250.
__________________
MAXIPADmoto
YouTube: MAXIPADmoto Instagram: maxipadmoto Twitter: MAXIPADmoto Bikes I own: RPS Hawk 250, Boom 125cc Vader, KTM 625 SMC & Yamaha V-Max (Gen 1) |
|
|
|
|
|