As the TT250 is on the way...

pyoungbl · 12-22-2016, 05:11 PM

As I mentioned earlier, the OEM license plate bracket did not have holes that would line up with my license plate. I see where someone drilled two extra holes but even so, no joy. I made my own bracket:

with 6mm bolts coming from inside the fender into threaded holes in 1/2" aluminum plate. Then I drilled and tapped holes to match my plate and done. Of course I had to gild the lilly a bit in order to reduce the weight.

Peter Y.

12-22-2016, 05:11 PM	#10
pyoungbl Join Date: Feb 2016 Location: Portsmouth, Virginia, USA Posts: 632	license plate bracket As I mentioned earlier, the OEM license plate bracket did not have holes that would line up with my license plate. I see where someone drilled two extra holes but even so, no joy. I made my own bracket: with 6mm bolts coming from inside the fender into threaded holes in 1/2" aluminum plate. Then I drilled and tapped holes to match my plate and done. Of course I had to gild the lilly a bit in order to reduce the weight. Peter Y. Last edited by pyoungbl; 12-22-2016 at 05:12 PM. Reason: spelling
	5