07-14-2016, 10:02 AM | #1 |
Join Date: Mar 2010
Location: Volcano, Ca
Posts: 7,112
|
TT250 Sprockets
Well heck, I was going to pull the trigger on a JTR269.47 this morning so I'd have it here for the big tear down. The 269 been the go-to sprocket for my X-Moto and other CB Hondoids over the years.
I got a wild hair this morning before work about 4:00am and decided to go out to the garage and take a look, just to be sure. I wanted to make sure the bolts were 90mm apart, etc.... Well, curveball. As you can see on my X-Moto, it's the 269 type sprocket. Correct bolt pattern and a flat sprocket, as is in the attached schematic. The TT250 rear sprocket however, much to my surprise has an offset to it. I didn't get a chance this morning to lay a straight edge on it and measure the offset but does anyone have an idea of what sprocket this may be? It still has the four (4), 90mm mounting holes and everything would be just like the 269, except for the offset. If someone has a chance, lay a straight edge on the sprocket and see what the offset measures out at. It's going to be a long day in the cube..... :-(
__________________
"Light a fire for a man, and you heat him for a day. Light a man on fire, and you heat him for the rest of his life." 2007 Suzuki DRZ400S (SM convert) 2009 Q Link XP 200 1967 BSA B25 250cc Starfire 2022 Royal Enfield Interceptor 650 2023 Royal Enfield Scram 411 1948 Royal Enfield Model G 350 Last edited by 2LZ; 03-27-2017 at 05:08 PM. |
|
|
|
|
|