Tools & Spare Parts for Hawk Roadside Repairs

pcspecialist · 06-17-2016, 12:40 PM

What tools and spare parts (links to each if possible) do you recommend keeping on hand for Hawk roadside repairs?

I'll get the list started:

Spark Plug, I carry the original since I replaced it with an NGK (2202) DPR8EIX-9 Iridium IX: http://www.amazon.com/dp/B000CSGWZC

CDI: what do you recommend

Coil, wire and boot: what do you recommend

Wrenches: I hate Crescent Hammers, but, with all the different sizes of bolts, should I go this route, and if not, what sizes do you recommend? I know I need 14mm, 17mm, and 19mm for the front and rear axles.

Tire spoons

Tube patch kit

Air pump: I'm going with a Topeak Mountain Morph Pump, but, feel free to offer any other suggestions: http://www.pricepoint.com/Brand/Tope...Morph-Pump.axd

06-17-2016, 12:40 PM	#1
pcspecialist Join Date: May 2016 Posts: 583	Tools & Spare Parts for Hawk Roadside Repairs What tools and spare parts (links to each if possible) do you recommend keeping on hand for Hawk roadside repairs? I'll get the list started: Spark Plug, I carry the original since I replaced it with an NGK (2202) DPR8EIX-9 Iridium IX: http://www.amazon.com/dp/B000CSGWZC CDI: what do you recommend Coil, wire and boot: what do you recommend Wrenches: I hate Crescent Hammers, but, with all the different sizes of bolts, should I go this route, and if not, what sizes do you recommend? I know I need 14mm, 17mm, and 19mm for the front and rear axles. Tire spoons Tube patch kit Air pump: I'm going with a Topeak Mountain Morph Pump, but, feel free to offer any other suggestions: http://www.pricepoint.com/Brand/Tope...Morph-Pump.axd Last edited by pcspecialist; 06-17-2016 at 01:29 PM.
	0