2nd Generation, CSC Center Stand: Installation

rjmorel · 02-14-2016, 03:01 AM

Dan, mine was ground from CSC as I could plainly see the grind marks where it contacts the frame. I only tried using the new stand a few times before parking it as it's still too cold here to ride to much. If I grind it more will that get it onto the front tire when using it? I'm more concerned about it rocking off the center stand then whether it rests on the front or rear tire because I'm use to propping the rear up with a board. rj

02-14-2016, 03:01 AM	#13
rjmorel Join Date: May 2007 Location: Warshington Posts: 928	Dan, mine was ground from CSC as I could plainly see the grind marks where it contacts the frame. I only tried using the new stand a few times before parking it as it's still too cold here to ride to much. If I grind it more will that get it onto the front tire when using it? I'm more concerned about it rocking off the center stand then whether it rests on the front or rear tire because I'm use to propping the rear up with a board. rj __________________ Live Zong, and Prosper
	0