Zongshen RX3: Suspension System

SpudRider · 12-03-2015, 06:53 AM

Fork Disassembly and Inspection

Upper Fork Tube Disassembly

To disassemble the forks, begin by loosening the cap of the fork with a 19 mm wrench. Lower the upper fork tube to reveal the fork spring. Insert a 14 mm cone wrench, or another thin wrench, between the fork coils, and grab the lock nut below the fork cap. While holding the lock nut, remove the fork cap and washer with a 19 mm wrench.

Remove the fork spring, and drain the fork oil.

Remove the upper fork tube following the instructions in the CSC Fork Maintenance Tutorial at the following link.

http://www.cscmotorcycles.com/Articles.asp?ID=263

12-03-2015, 06:53 AM	#1
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Zongshen RX3: Suspension System Fork Disassembly and Inspection Upper Fork Tube Disassembly To disassemble the forks, begin by loosening the cap of the fork with a 19 mm wrench. Lower the upper fork tube to reveal the fork spring. Insert a 14 mm cone wrench, or another thin wrench, between the fork coils, and grab the lock nut below the fork cap. While holding the lock nut, remove the fork cap and washer with a 19 mm wrench. Remove the fork spring, and drain the fork oil. Remove the upper fork tube following the instructions in the CSC Fork Maintenance Tutorial at the following link. http://www.cscmotorcycles.com/Articles.asp?ID=263 __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 Last edited by SpudRider; 12-03-2015 at 11:40 PM.
	0