Go Back   ChinaRiders Forums > Technical/Performance > Dual Sport/Enduro
Register FAQ Community Calendar Today's Posts Search
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 11-19-2015, 01:58 PM   #1
Cbohannan0513   Cbohannan0513 is offline
 
Join Date: Nov 2015
Location: Woodstock, GA
Posts: 15
Grin 2009 Tmec 200 Overhaul

As Promised, here is my post/depiction of the Tmec I bought a few months back for a few hundred bucks. The bike was running and driving up until about 4 weeks ago. I purchased it with: no air filter, broken mirrors, red plastics that had been painted black, no cover for the counter sprocket, holes drilled in the exhaust with a bolt through the middle holding the front and rear pieces together, a broken head stud that had broken the head when removal was attempted by the previous owner tried, front brake lever was broken, a broken speedometer needle, bent handle bars, poorly tuned carburetor, and several other janky home remedies riddled across it from top to bottom.

Here is a list of things I have completed or am aiming to repair/ replace along the way during this rebuild. All photos I have taken are shown at:http://s1042.photobucket.com/user/cb...n0513/profile/

Here are the new bars and grips proceeding the master cylinder and new handle being installed.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

This is the master cylinder being painted after soaking and being cleaned.
[IMG][/IMG]

Originally I had no idea where to find a new brake lever to fit this bike, so I purchased an entirely different master cylinder and lever assembly... Only to find out my brake light switch would not fit. Here is a shot of the OE switch that we ended up staying with. We also stayed with the OE Master and an OE lever that we found from Excaliper.
[IMG][/IMG]
[IMG][/IMG]

Though I am still deciding what sprockets to run, here are the pictures of my OE counter sprocket(17T), retainer, and rear sprocket (56T).
[IMG][/IMG]

[IMG][/IMG]


I didn't really take pictures of the plugs that get removed and swapped to the new cluster, but here is the new cluster installed.
[IMG][/IMG]

I'll add more as time allows! I have pictures and stories for days.


 
Reply With Quote
 

Tags
chassis, engine, full build, parts, tmec 200



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:20 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.