Hello from Ukraine

bahmut · 11-10-2015, 05:03 PM

Hello, guys. At first, sorry for my English))
My name is Dmitry, I am from Ukraine, I have a Zongshen Sierra ZS200-GY2, I bought it one and half year ago. It were used, I am the third owner.
I replaced wheells and tires ( 21' and 18'), valves, piston and pistons ring, cilinder, installed new cowl, but lamp, which install there, is bad, so I installed two LEDs. I had a problems for rear fork and I repaired this. And I made two bolts for rear damper. I made new downside bush and installed into her two sphere bearings. Ignition coil from stator is broken, so previous owner installed
CDI-DC frome scooter, because of this, advance angle is wrong.

11-10-2015, 05:03 PM	#1
bahmut Join Date: Nov 2014 Location: Kramatorsk, Ukraine Posts: 5	Hello from Ukraine Hello, guys. At first, sorry for my English)) My name is Dmitry, I am from Ukraine, I have a Zongshen Sierra ZS200-GY2, I bought it one and half year ago. It were used, I am the third owner. I replaced wheells and tires ( 21' and 18'), valves, piston and pistons ring, cilinder, installed new cowl, but lamp, which install there, is bad, so I installed two LEDs. I had a problems for rear fork and I repaired this. And I made two bolts for rear damper. I made new downside bush and installed into her two sphere bearings. Ignition coil from stator is broken, so previous owner installed CDI-DC frome scooter, because of this, advance angle is wrong.
	0