09-30-2015, 11:34 AM | #17 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
The 30mm Mikuni that I'm familiar with has the pilot mixture screw just under the transition from the carb to the intake tube. When the screw is in that position, it controls fuel.
On a typical two-stroke, the screw is at the air filter end of the carb, and it controls air.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
Tags |
250d, needle clip position, pilot jet |
|
|