04-30-2015, 02:17 AM | #9 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
I threaded the end of the handlebars with a 1/2-13 tap. The coarse threaded bolts are easier to find. Also, it is easier to install the 13 tpi bolt, since the bolt grabs the threads more easily. I used 1-inch long bolts, but I still have a lot of thread available inside the handlebars. Therefore, I am going to install either 1-1/2 inch, or 2-inch long bolts. This installation is very strong; I am pleased with the results.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
|
|
|
|