New Zongshen RX3 (ZS250GY-3) Dual Sport

[SpudRider]

Originally Posted by katflap

Got a bit keen with the oil today and over filled

But rather than play with the sump plug to drain a bit off, where it can go

either way, just the right amount or all of it

Turned out its possible to get a thin plastic tube in through and down the filler hole, the one with screwdriver slot that sits above the clutch, and suck it up, block, take it out and release a tube full of oil.

Tastes great , nah , use a clear plastic tube so you can see where the oil is at. top bodge

Thanks for posting the tip, Kat.

Greatly overfilling the oil level must be avoided, since it can cause excessive oil pressures, and damage oil seals, et cetera. However, if the oil level is only slightly high, the crankcase ventilation tube will automatically, safely remove the small amount of excess oil.