Zongshen Sierra Electrical

[SpudRider]

Originally Posted by AnimalTk

Thanks a lot for all your help.

I'm gonna go with the 4 LEDs and try to fix up the wiring. Will any flasher do the trick to get them working properly? Also, the screws for the stock tail light are set wider than the "universal" tail light I purchased. Any leads on where I can get a good one for the Zong? Otherwise I may have to hook it up above the license plate. From what I can see, the flasher installation seems pretty simple. I'll try to check some videos for help.

If you want to use four, LED turn signals you will need an LED flasher. You might be able to find one at you local, auto parts store. Make sure it has 'LED' printed on the flasher itself. However, some of these automotive LED flasher won't work, because they have an 'extinguished bulb' feature built into them. The following flashers are guaranteed to work.

https://www.superbrightleds.com/more...asher/787/842/
http://www.rockymountainatvmc.com/p/...y?term=flasher

I installed a DRC Edge 2 Tail Light on my Zong.

http://www.chinariders.net/showthread.php?t=4765