07-22-2013, 11:37 AM | #16 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
It's a little tough to tell from the pics, but it looks like the intake tube might be backwards. I say that for two reasons:
1. There is an odd offset o-ring pattern on the paper gasket that you removed from the head. 2. There should be a paper gasket between the insulator and the carb, but not the insulator and the intake tube, nor between the intake tube and the head. Are the new o-rings above the surface when sitting in the groove?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
|
|