Qlink XF200 SM Front Sprocket Change over

JTCAndrew · 02-19-2011, 09:25 PM

Ok here is a Picture of my 2009 Qlink XF200 Front Sprocket 15T - It is the one I just took off.

The NEW 16T Sprocket I put on was ordered from http://www.jetsrus.com Part #550-16T - I believe they list it as a Suzuki DR-125 Sprocket. The Sprocket was an Exact fit, with Not Problems.

The Socket to remove the Sprocket NUT is a 28mm - I Found somewhere in the forums it was listed as a 24mm - That is InCorrect. You are also going to want to use an Air Impact to get it off as well. It was super tight - The impact made the job so much easier!

Just thought I'd put a few more notes out here about changing the sprocket over in Hopes that it helps someone.

Ride Safe!

Andrew 8) Jamestown, PA

02-19-2011, 09:25 PM	#1
JTCAndrew Join Date: Jan 2011 Location: Jamestown, PA Posts: 589	Qlink XF200 SM Front Sprocket Change over Ok here is a Picture of my 2009 Qlink XF200 Front Sprocket 15T - It is the one I just took off. The NEW 16T Sprocket I put on was ordered from http://www.jetsrus.com Part #550-16T - I believe they list it as a Suzuki DR-125 Sprocket. The Sprocket was an Exact fit, with Not Problems. The Socket to remove the Sprocket NUT is a 28mm - I Found somewhere in the forums it was listed as a 24mm - That is InCorrect. You are also going to want to use an Air Impact to get it off as well. It was super tight - The impact made the job so much easier! Just thought I'd put a few more notes out here about changing the sprocket over in Hopes that it helps someone. Ride Safe! Andrew 8) Jamestown, PA
	0