10-16-2008, 09:50 PM | #32 |
Join Date: May 2008
Location: Ontario, Canada
Posts: 327
|
elroy:
I'm still waiting on my stainless bolt to come in from Halifax via Brafasco/HD Supply. I ordered a 1/2" x 9 inch. I know the length will fit, but I thought I would have to machine it down to the stock size, which is a bit smaller in diameter than 1/2". Did you half inch bolt fit in OK? Was it Tight? Did you grease it? Lock nut? Washer on each end? I bought a castle nut thinking I would drill it and put a cotter pin through it, but I might get a locknut setup and not put the nut on extremely tight. Does anyone know what the torque setting is for these swing arm bolts? My bolt should come in tomorrow.
__________________
Riding a blue plated HSUN 200GY (Otherwise know as a ULIKE 200GY, SUNL 200GY or a VIVA SX200S), a 2010 Gio Mini Hummer 110cc ATV, 2010 Gio T3 Rebel ATV, and a 2002 Kawasaki KLR650, 70cc Katera dirtbike, and a 49cc GIO dirtbike...so far! |
|
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|