04-10-2009, 11:52 PM | #1 |
Join Date: Aug 2007
Posts: 1
|
gy6 new cdi wont stay running
gots a united motors dt200 , has been a blast ,
cleaned carb and changed cdi , so far, what happens is , i kickstart it , with an external sparkplug i see spark . \ i will start run 10 seconds,thorttle doesnt do crap , then stops, and when i try it again , the spark is gone , until later on . so im unsure , if its a coil or magneto. or maybe some crappy wiring. i truly think its electrical , carb has been gone through , and fresh fuel, new spark plug. cdi and magneto are making some spark at least. suxs im thinking of getting rid of it ,or buying a spare parts bike for trouble shooting. any body ever have a similar problem and got it fixed? |
|
04-11-2009, 02:21 AM | #2 |
Join Date: Apr 2007
Location: Show Low Arizona
Posts: 2,889
|
I'd say coil....or bad connection somewhere that's loose maybe.
__________________
<br />2001 Suzuki DR200SE<br />1997 Suzuki RM250 YIKES<br />1995 Yamaha Breeze 125 daughters<br />1991 Honda XR80r Restored<br />maybe a 2003 Yamaha TTR90 |
|
|
|
|
|