|
|
|
|
Thread Tools | Search this Thread | Display Modes |
11-03-2008, 07:02 PM | #1 |
Join Date: Apr 2007
Location: mn
Posts: 183
|
Lifan lf50qt-2a pickup coil where do I find one what part n
I bought a lifan lf50qt-2a metro, it is a 2008 andthe little coil assembaly is broke,
it is a magnet with a coil around it and one blue wire coming from it. it mounts on with two bolts and the "flywheel???* spins and the signal tells when to spark, where do i find one? thanks |
|
11-03-2008, 07:27 PM | #2 |
Join Date: Apr 2008
Posts: 782
|
hey tinkr
here are afew part sites www.scooterparts4less.com www.scootertronics.com www.partsforscooters.com www.oregonvintage.com www.fancyscooter.com www.partsprousa.com these are where i get my parts from on everything so i hope that will give you a good start DD |
|
11-03-2008, 07:34 PM | #3 |
Join Date: Jun 2008
Location: wise va
Posts: 636
|
if you look on here somewere is tech papers im not sure if you have a gray market or if there is really any diffrence but check to see if yours matches the lifan i have listed if it does my best guess is you have to get a lifan and i would go to hooper or bruce at ej cycles instead of fighting with al. i dont know if its diffrent from everybody else but i know if you put a cdi box on your lifan and its a regular box the box will smoke and the voltages are very diffrent
__________________
halls auto l coolster, modcycles, yanmar & zongshen, dealer fired roketa,lifan and jet moto and apollo quit me who's next |
|
11-04-2008, 10:01 PM | #4 |
Join Date: Apr 2007
Location: mn
Posts: 183
|
I can not find any tech papers on my scooter, the above links dont have what i need, can anyone else direct me?
I dont need the whole stator asembely, just the small pickup coil with blue/yellow wire. can any dealers help? |
|
11-04-2008, 10:29 PM | #5 |
Join Date: Apr 2008
Posts: 782
|
you may not find just that little of a part by its self
post a wanted add here in the wanted section any chance of a pic ?? |
|
11-04-2008, 10:40 PM | #6 |
Join Date: Apr 2008
Posts: 782
|
some more links ,,, try calling some of them they may or you actually might get some one to help you at there site ?????
http://www.iscooterparts.com/ http://evosales.com/cat_scooter_parts.cfm << this where i found iscooter try calling its frustrating but thats what you get when you buy a china product no dealer to help post a pic of the part next to a ruler so i can see the size of it many parts are enterchangeable this guy sells what you have get a hold of him http://www.cycletrader.com/find/list...QT-2A-91778158 |
|
11-04-2008, 10:45 PM | #7 |
Join Date: Apr 2007
Location: mn
Posts: 183
|
|
|
11-04-2008, 10:48 PM | #8 |
Join Date: Apr 2007
Location: mn
Posts: 183
|
just interested, should my scooter start without this if the battery is charged? because it wont start, i know the pulse sensor is bab because it is broke open and the wires inside are messed up.
|
|
11-04-2008, 11:04 PM | #9 |
Join Date: Apr 2008
Posts: 782
|
http://www.scooterescapes.com/contactus.html
see if these guy's can direct you ------------------------------------------------------------------------------------- http://mefast.com/ << this outfit was linked with a lifan lf50qt 2a i clicked it and mefast popped up http://www.google.com/search?sourcei...f50qt+scooters <<<so i started a google search and all these popped up |
|
11-04-2008, 11:09 PM | #10 | |
Join Date: Apr 2008
Posts: 782
|
Quote:
not sure because it sends the spark information, i finally saw the pics dont think you will just get that part alone looks like the whole thing is about $25 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>. woe Barrack just became Prsident |
|
|
11-05-2008, 05:43 PM | #11 |
Join Date: Apr 2007
Location: mn
Posts: 183
|
i think i got one from iscooter
|
|
09-13-2017, 11:27 AM | #12 |
Join Date: Sep 2017
Posts: 2
|
I have bought a wrecked Lifan LF50QT-2A as a project in the hope of getting it going and the wiring is a complete mess. I noticed a cut wire coming from engine casing and realised it went to the stator and pick up coil so I bought a new stator with coil and am assured it is the correct one.
There is a white block on the end and I know where that goes but there is also a male and female bullet connection on the outside of the block. Has anybody got any idea where here connect to please. Any help would be appreciated |
|
09-13-2017, 12:41 PM | #13 |
Join Date: Jan 2008
Posts: 221
|
|
|
09-13-2017, 01:25 PM | #14 |
Join Date: Sep 2017
Posts: 2
|
|
|
|
|
|
|