10-09-2023, 09:14 AM | #1 |
Join Date: Oct 2023
Posts: 9
|
tbr7 has 4th gear stuck on display?
So its kinda weird, it shows "4" on the gear display, for first gear, second gear, and fourth gear.
however, when in 3rd or 5th gear it shows a "9" on the display the bike also doesnt start now unless i hold the clutch in (i presume because it thinks its in gear) this happened after the chain popped on me when downshifting. |
|
10-09-2023, 09:18 AM | #2 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,707
|
Check for broken wires on gear selector switch which is near the front sprocket. The chain probably broke a few.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
10-09-2023, 03:15 PM | #3 |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,625
|
They are color coded, so you can repair without mystery. The connector is probably the typical 6 wire bus connector. Good luck.
__________________
-NOS 2020 KTM 250SX (2-stroke motocross) |
|
10-12-2023, 08:14 PM | #4 | |
Join Date: Oct 2023
Posts: 9
|
Quote:
so upon checking today its completely fine in terms of the wires being broken. i unplugged the speedometer assembly and plugged it back in to no avail, it still always shows as 4th gear. the number 4 is permanently on. its weird |
|
|
10-12-2023, 08:16 PM | #5 |
Join Date: Oct 2023
Posts: 9
|
so looking at this image, notice how "3" and "4" mixed together looks like 9. so i guess thats why it shows a 9 on the display when in third gear. hoping changing the speedometer fixes it cause i plan on doing that in the next week or two |
|
10-14-2023, 07:39 AM | #6 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,061
|
I would remove and check the inner terminals on the selector switch just to verify that its intact, and to make sure the part that it interfaces with on the motor is working as it should
|
|
10-14-2023, 08:52 AM | #7 |
Join Date: Oct 2023
Posts: 9
|
will do, if worse comes to worse, id imagine the hawk/tt250 gear indicator assembly fits on the tbr7? the best part about these bikes is how dirt cheap the parts are. something fails and i can just drop 20 bucks max on a new part
|
|
|
|
|
|