my next upgrade
took out the throttle limit screw. added 2 inch spacers to the rear. replaced stock with xlink gold chain. tried to reset the carb needle, but it only had 2 slots, one very low and one at top where it was factory set. ran like shit on lowest setting without access to air/fuel mix screw. need a new carb without the air/fuel capped off. which btw im gonna try to desolder off. and one that has screws to access the float bowl. and gonna add a fuel shutoff seeing as how i have to drain the whole tank from the overflow screw if i wanna replace carbs. things running too good for a chinese quad but i know im gonna regret saying that someday. too bad we cant get spinner rims!
|