|
09-01-2018, 08:58 PM | #1 |
Join Date: Jul 2018
Location: NEPA
Posts: 273
|
Hawk or TT250 back rack.
Hi all,
I'm thinking about doing a few luggage racks on the CNC but I didn't know if anyone would be interested. I did a prototype for prof of concept to see what I liked or didn't. It's .25 6061 T6. Might do a pattern on the inside to dump dead weight. what do ya think?
__________________
2018 Hawk P&P Decked .040 off the head. 17/43 D.I.D. 428, NGK Iridium plug, DeCat, Wrapped pipe, Custom S.S. Muffler core, Nibbi PE30 115/35, L.E.D. Lights, Digital Cluster, USB port, Cutting Bord skid plate, Oil cooler w/ custom CRF oil filter inline, 5Wt fork oil, Rear Shock, CNC Back Rack, 30mm FAT bars, Bark Busters, ProGrips, Adjustable levers, Shinko 700’s lots of Loctite! Last edited by Red Hawk; 09-01-2018 at 11:03 PM. Reason: Pics |
|
09-01-2018, 09:12 PM | #2 |
Join Date: Jul 2018
Location: las vegas nevada
Posts: 70
|
That is perfect!! I have the tt 250 can you make me one ? How much?
|
|
09-01-2018, 09:19 PM | #3 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,710
|
I like it.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
09-01-2018, 10:38 PM | #4 |
Join Date: Nov 2016
Location: robertsdale alabama usa
Posts: 1,007
|
holes sized for the plastic bungee cords all along the perimeter would be the cats meow and make sure its wide enough to get the hooks in without hitting anything.
__________________
1991 harley heritage softail classic 2016 hawk kaw h1 400 tripple 13' long chopper in progress 2009 johnny pag bar hog 2004 hd electra glide ultra classic shriner edition 1997 harley davidson 1200 sportster 1972 harley davidson amf sx250 |
|
09-02-2018, 10:04 PM | #5 |
Join Date: Jul 2018
Location: las vegas nevada
Posts: 70
|
Is this made out of steel or aluminum
|
|
09-05-2018, 08:28 PM | #6 |
Join Date: Jul 2018
Location: NEPA
Posts: 273
|
Another design, I think this is it !!
So I think this is it ! Just about right height now and straps fit everywhere for odd shapes stuff. Only took about an hour for both sides on the CNC.
I think a skid plate with an oil cooler mount is next.
__________________
2018 Hawk P&P Decked .040 off the head. 17/43 D.I.D. 428, NGK Iridium plug, DeCat, Wrapped pipe, Custom S.S. Muffler core, Nibbi PE30 115/35, L.E.D. Lights, Digital Cluster, USB port, Cutting Bord skid plate, Oil cooler w/ custom CRF oil filter inline, 5Wt fork oil, Rear Shock, CNC Back Rack, 30mm FAT bars, Bark Busters, ProGrips, Adjustable levers, Shinko 700’s lots of Loctite! |
|
|
|
|
|