Spark plug confusion

MI · 09-07-2017, 08:19 PM

I'm confused which spark plug works on a Hawk 250. I bought them both from Hawk250.com. One of the plugs is a dpr8eix-9 (H6Y2) with a metal top screwed on top. Plus the other one is a dr8eix (h5y1) without a top just threads. So which one is the correct plug for the bike? By the way, can't test it cuz I don't have the bike yet. One box says 2202. The one with the metal top, and the other box says 6681 the one with just threads. Which one can I use once I get a Hawk!

MI · 09-07-2017, 09:03 PM

Can a NGK 2202 and a 6681 spark plug take the heat from a Hawk 250?

humanbeing · 09-07-2017, 09:45 PM

https://translate.google.com/transla...html&sandbox=1

The screw (ネジ) type DPR8EIX-9 in Asia is 4274

| 2202 is the separate (分離) type

Megadan · 09-08-2017, 12:32 AM

The DPR8EIX9 mainly differs from the DR8EIX in 2 regards.

The P in the plug code stands for a projected electrode. If you look at your picture you will notice that the ceramic and tip stick out further from the threaded body a little bit - usually around 1 to 2mm out from the threaded body of the plug. This puts the spark closer to the center of the combustion chamber, which generally means a more efficient combustion. The exposed electrode and tip often tend to remain cleaner due to being more exposed. This also means that the plug will act just a tiny bit hotter than a standard plug of the same temp rating. That projection can also sometimes be a problem for some engines, potentially interfering with piston tops and valves.

The 9 at the end of the code denotes a preset gap in mm. This case it would be 0.9mm, aka .036". A much wider gap than is recommended for a standard copper plug on these engines, but with an iridium plug it may work well. I have an Iridium Denso plug gapped to .8mm, aka .032" and it runs without a miss.

As far as the ends of the plug, if that current cap will not unscrew, it means you need to change to a different plug wire end. The DR8EIX plug without the cap, on the other hand, will work perfectly as is with no other changes needed.

ughmas · 09-13-2017, 04:41 AM

I run the DPR8EIX-9 in my TT250 and it seems to work great, you just have to unscrew the cap.

Bill1 · 09-18-2017, 08:42 AM

Quote:

Originally Posted by MI

I'm confused which spark plug works on a Hawk 250. I bought them both from Hawk250.com. One of the plugs is a dpr8eix-9 (H6Y2) with a metal top screwed on top. Plus the other one is a dr8eix (h5y1) without a top just threads. So which one is the correct plug for the bike? By the way, can't test it cuz I don't have the bike yet. One box says 2202. The one with the metal top, and the other box says 6681 the one with just threads. Which one can I use once I get a Hawk!

I'm glad that I'm not the only one.

http://chinariders.net/showthread.php?t=18413

09-07-2017, 09:03 PM	#2
MI Join Date: Jul 2017 Posts: 25	Spark plug Heat Ratings Can a NGK 2202 and a 6681 spark plug take the heat from a Hawk 250?
	0

09-07-2017, 09:45 PM	#3
humanbeing Join Date: Mar 2008 Posts: 2,436	https://translate.google.com/transla...html&sandbox=1 The screw (ネジ) type DPR8EIX-9 in Asia is 4274 \| 2202 is the separate (分離) type __________________
	0

09-08-2017, 12:32 AM	#4
Megadan Join Date: Apr 2017 Location: Omaha, NE Posts: 8,110	The DPR8EIX9 mainly differs from the DR8EIX in 2 regards. The P in the plug code stands for a projected electrode. If you look at your picture you will notice that the ceramic and tip stick out further from the threaded body a little bit - usually around 1 to 2mm out from the threaded body of the plug. This puts the spark closer to the center of the combustion chamber, which generally means a more efficient combustion. The exposed electrode and tip often tend to remain cleaner due to being more exposed. This also means that the plug will act just a tiny bit hotter than a standard plug of the same temp rating. That projection can also sometimes be a problem for some engines, potentially interfering with piston tops and valves. The 9 at the end of the code denotes a preset gap in mm. This case it would be 0.9mm, aka .036". A much wider gap than is recommended for a standard copper plug on these engines, but with an iridium plug it may work well. I have an Iridium Denso plug gapped to .8mm, aka .032" and it runs without a miss. As far as the ends of the plug, if that current cap will not unscrew, it means you need to change to a different plug wire end. The DR8EIX plug without the cap, on the other hand, will work perfectly as is with no other changes needed. __________________ Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124
	1

09-13-2017, 04:41 AM	#5
ughmas Join Date: Feb 2016 Location: NY Posts: 178	I run the DPR8EIX-9 in my TT250 and it seems to work great, you just have to unscrew the cap. __________________ 2005 CBR600RR 2016 CSC TT250 Coming Soon
	0