|
05-27-2018, 10:56 AM | #1 |
Join Date: May 2018
Location: Central MS
Posts: 29
|
Tao Tao ATA150G stock carb
Does anyone know which carb the ATA150G actually comes with? The diagram on Partskit shows it to be a PZ27 but I thought that was a bit big for a 150. The one I have has had someone else (I assume the PO) install a PZ20 and rather than mess with that or a PZ27 I thought to go with a Mikuni VM26 if the machine can handle a carb that large.
I much prefer the Mikuni's, they are way easier to tune. Thanks in advance! |
|
05-27-2018, 05:28 PM | #2 |
Join Date: Jun 2017
Posts: 73
|
Try the pz20 and give a report.
|
|
05-28-2018, 01:14 PM | #3 |
Join Date: May 2018
Location: Central MS
Posts: 29
|
The PZ20 as installed runs ok but the idle is wonky and takes a bit to come down when revved.
Tao Tao's Partskit.com shows a PZ27 on that bike. So, I was wondering if anyone did a VM26 conversion on one of the 150-200 series GY6 quads |
|
|
|
|
|