Hawk 250 parts identification

[eco4arcs]

So I just tore into my first hawk build and was wondering if I have all my small parts and fasteners as well as an understanding of their purpose.

Is there a fastener list out there somewhere? I couldn't find one.
I know I am missing the rear schock lower bolt nut...but don't know what else I am missing.

I'm also perplexed by the two washers. Any guidance would be appreciated.

Thanks

[Sport Rider]

looks like my set. I just didn't lay them out all orderly. where is your kickstand?

on the front turn signals, the green orange one goes on the left hand side.

did yours come with a crude instruction book? it's ok for following the basic install process, but lacks a little detail that you have to make up on the fly.

[eco4arcs]

Originally Posted by Sport Rider

looks like my set. I just didn't lay them out all orderly. where is your kickstand?

on the front turn signals, the green orange one goes on the left hand side.

did yours come with a crude instruction book? it's ok for following the basic install process, but lacks a little detail that you have to make up on the fly.

Kickstand was bolted on.
No instructions at all.
Do those two washers go on the rear shock bolt or the front axle?
Thanks

[Sport Rider]

Originally Posted by eco4arcs

Kickstand was bolted on.
No instructions at all.
Do those two washers go on the rear shock bolt or the front axle?
Thanks

Let me scan my install manual in and send it to you. the larger washer was for the brake pedal for the rear brake. cotter pin too. I don't recall having another washer.

[eco4arcs]

Thanks so much.

[Sport Rider]

Originally Posted by eco4arcs

Thanks so much.

huge file. won't upload here. pm me your email to send it to you.

[NickThrash]

Originally Posted by Sport Rider

Let me scan my install manual in and send it to you. the larger washer was for the brake pedal for the rear brake. cotter pin too. I don't recall having another washer.

could you send that my way too? nick18257@aol.com

[TCalYen]

Originally Posted by Sport Rider

Let me scan my install manual in and send it to you. the larger washer was for the brake pedal for the rear brake. cotter pin too. I don't recall having another washer.

Hi everyone -

New to the forum and SO glad it exists and is active.

I just got the Hawk for my 13 year old son and oh boy. No assembly instructions.

I know there is a scanned one floating around. Could someone please email it to me. Would be greatly appreciated.

Jon - tcalyen@yahoo.com

[OUTERLIMITS]

Originally Posted by TCalYen

Hi everyone -

New to the forum and SO glad it exists and is active.

I just got the Hawk for my 13 year old son and oh boy. No assembly instructions.

I know there is a scanned one floating around. Could someone please email it to me. Would be greatly appreciated.

Jon - tcalyen@yahoo.com

I don't have a Hawk, but this is off the RPS website.....

http://therps.net/DB-Hawk.html

[Customx253]

Originally Posted by TCalYen

Hi everyone -

New to the forum and SO glad it exists and is active.

I just got the Hawk for my 13 year old son and oh boy. No assembly instructions.

I know there is a scanned one floating around. Could someone please email it to me. Would be greatly appreciated.

Jon - tcalyen@yahoo.com

I could use a copy of the directions as well. peter.smooth@gmail.com

[BigDoug]

Wow this site is great. I love all the members willing to share. I wish I found this site before I assembled my 2 Hawks. I did find that my two bags of parts varied greatly! You may need to take a trip to the hardware store as well.

[SpudRider]

Welcome. We are glad you joined us, Doug.

[SpudRider]

Good for you, Eco. You have the China Riders spirit.

[Adjuster]

Rotated photo for you.




/

[Sport Rider]

you gotta explain that setup....garage door OUTSIDE?