|
|
04-26-2024, 11:44 PM
|
#1 |
|
Join Date: Aug 2013
Location: FL
Posts: 376
|
Airbox internals info of Vader/condor 150?
Anyone has any info on the internals of the airbox used on the 150cc Grom clones with Lifan engine and PZ27 carburetor?
I want to know if they are restricted, and where. If I were to drill a hole in it, where would I want to drill it? I'd prefer before the filter (towards the rear of the bike), so that the air can still be filtered. On the other hand, if it has a restrictive tube, I want to eliminate that, so that the bike at least will get sufficient airflow. I need to see the internals, without having to take mine apart.
__________________
  
|
|
|
04-27-2024, 09:26 AM
|
#2 |
|
Join Date: Sep 2021
Location: De Soto, MO
Posts: 1,978
|
Drill holes in the top of the airbox, for minimal water penetration. I would go with a bunch of 3/16" holes. You will probably have to re-jet the carb a little.
__________________
2021 Lifan Xpect--sold 2022 Lifan KPX 1972 Honda CT90--The Carrot 1969 Honda CT90--The Tomahto Cheesy is the WDK (workplace drama king). Now retired. Nope, back in the saddle. Nope, finally retired. Climate: The Movie https://www.youtube.com/watch?v=A24fWmNA6lM How our government really works https://www.youtube.com/watch?v=QjadCd0VRBw Question all authority.....think for yourself |
|
|
|
04-27-2024, 05:06 PM
|
#3 |
|
Join Date: Aug 2013
Location: FL
Posts: 376
|
No worries.
I've just removed the box, and opened it. There is really little to no intake limitation in the airbox. It's a square box, with an air inlet at the end (towards the rear wheel), a foam filter panel in the middle, and a rubber snorkel towards the carburetor. The limiting factor in the airbox, is the rubber snorkel, since it's squeezed, and bent (not straight). I've replaced it with a pod filter.
__________________
|
|
|
|
|
|
 |
|
|
Hybrid Mode
